When it comes to providing value for the money, Victony is a pioneer. Gaming, viewing HD video online, downloading, and uploading are all a breeze with its 1200 MBPS speed. The Victony Wa1200 wifi extender comes with a WPS, LAN/WAN port, ON/OFF switch, and reset button. It also supports router, repeater, and AP modes. Victony configuration can be done using WPS or a web browser via Victony WiFi AC1200 Extender Setup. You may easily stay connected even when your signals are weak because of its strong antennae. You can locate the ideal location to employ this extender with the aid of the LED indicator on it. You may connect any computer or gaming console to the extender’s two Ethernet ports, and the WAN port allows you to utilise Victony as a router.
How to setup my Victony WiFi AC1200 Extender via wps button
- Put your Victony WiFi extender close to your router first.
- For a quicker connection, it is advised to put it in the same room or within 5–10 feet.
- For victony wa1200 setup, wait till the power LED turns solid green after plugging in the extender.
- Now, for around 2 seconds, press and hold WPS on your Victory extender.
- By pushing the WPS button on your router, carry out the identical procedure there.
- Your Victory WiFi extender will now have a green blinking light, and your setup and operational router will also have a blinking light.
- Your router and Victory will instantly recognise one another and establish a connection within 10 to 15 seconds.
- The WPS light on your WiFi Extender will turn completely green once a connection is made.
- Now that your extender is unplugged, you may position it precisely where the dead spots are.
- NOTE: Try resetting the Extender if the WPS doesn’t work. Additionally, keep this extender away from large electrical appliances for a seamless WiFi connection.
Note:- if you need any help regarding your wifi extender follow on the screen steps given for your wifi range extender. For more information visit official website that is ap.setup
Victony WiFi AC1200 Extender via web browser
- You don’t need to plug your extender close to the router for this setup; you only need to plug it into one of the wall outlets.
- Wait until the extender boots up correctly and the power has a strong green signal.
- Open WiFi on any of your wireless devices, such as a laptop, WiFi-capable desktop, Mac, or phone.
- Now select the open/unsecured Victony Network from your list of WiFi networks and connect.
- Once connected, open the browser on the same device, type 192.168.10.1 in the address box, and then press Enter.
- Your Victony WiFi Extender Setup page will be made available to you.
- NOTE:- Try resetting the extender, switching the browser, or using a new device if 192.168.10.1 doesn’t work.
- The directions on the screen on the Victony browser setup page should be followed.
- Choose the primary wireless network you want to extend when prompted to choose the network you would like to extend.
- You will next be prompted to enter your wireless Internet password.
- Upon successfully connecting to the router, the extender’s WiFi LED will turn solid green.
- Now that it’s unplugged, you can move it to where you require Internet connectivity.
- It takes the extender about 60 seconds to power up once you disconnect it.
- Place the extender in the router’s direct line of sight, away from large appliances like the microwave, for the best coverage.
- The Victony WiFi extender comes with a manual.