Ducted air conditioners are a great way to cool your home or office space. They can be used in homes, offices, and other commercial buildings. Ducted air conditioners are an indoor unit and an outdoor unit.
The indoor unit is usually located inside a room of your home or business building and this will have a cooling coil that is made up of metal pipes and fins. The outdoor unit is mounted on the outside wall of the building and it has vents that lead into the room where the indoor unit sits.
You should clean your ducts regularly to ensure they are free from dirt and debris which could lead to mold growth or other problems like clogs in your system. Here are some tips on how to clean different units of ducted air conditioner:
Get Rid Of Dust
Before you start, make sure that your air conditioning unit is unplugged, and that the power cord is completely disconnected from the wall. Use an air blower to remove dust and debris from any areas that have been cleaned using wet clothes or rags, such as fan blades or grilles on vents or doors which may have become coated with dust over time due to the accumulation of dirt on their surfaces.
You should clean the filter and evaporator with a vacuum cleaner. It is recommended that you should use a vacuum with a HEPA filter to remove dust. As the HEPA filter can trap minute particles of dust and even harmful microbes.
Also, the HEPA filter will not release trapped particles in the air. Also, you can use compressed air to blow out any crevices that may still have debris in them. If you do not have any experience in this field, then you should consider hiring professionals such as air conditioning Sydney contractors.
Wipe Down Surfaces
Use a damp, clean rag to wipe down the inside of the unit, particularly where condensation may collect from the air conditioner’s coils or ducts (especially around electrical components). These should be carefully wiped clean with a clean rag before drying completely so as not to damage them further if they are plastic-coated components like grille material or metal blades themselves if they are made from a metal alloy instead of being all-plastic ones like those found on most older models).
If needed, clean your AC unit with a cloth dampened with vinegar and water then dry it off with paper towels or newspaper before plugging it back into its socket outlet on the wall behind where you were sitting when you were working on it.
First, take out the filters from the unit and rinse them with water. Then, fill up a bucket with warm water and add some dishwashing liquid to it. Fill up your bucket until it is about 2/3 full. Next, use a toothbrush to scrub all surfaces of each filter in the unit with soap and water.
Make sure that you scrub both sides of each filter so that there are no dirt particles left behind (this will prevent build-up). After scrubbing all filters, rinse them under cold water for about 3 minutes before putting them back into place inside your AC unit. You should clean the filters by using a soft brush to remove dirt and debris.
To avoid harming the filter, use only warm water and mild soap. Rinse thoroughly with clean water before replacing it back in its place inside your AC unit. Cleaning filters is quite a difficult job for non-professionals. You should immediately contact renowned contractors like ducted air conditioning Sydney.
Check For Loose Parts
Unscrew the cap on top of your unit, and drain any water that may be inside by plugging in a garden hose to the drain port located at the bottom of your unit. After that, you should check for any loose parts such as screws or bolts which may have come loose over time through normal wear & tear from use and/or from being dropped into the water accidentally during cleaning operations; make sure these are secure before proceeding further with further steps.
Air conditioners are a common sight in most homes. They are installed in different rooms of the house and help in keeping the temperature at a comfortable level. Air conditioners work on the principle of evaporation and evapotranspiration by which they cool down the room by removing moisture from the air. With time, dust and dirt build up inside the ducted AC.
It is important to do the maintenance of your AC to maintain its high efficiency. use a soft brush to remove any dirt particles or dust from inside the cabinet surrounding your unit’s compressor. We recommend you follow the right tips and tricks to clean different units of ducted AC.